• A complete radio system capable of 120 degree or 140 degree CCPM
   
• Recommended Servo

  Swash servo	FBL-DS01	DS8915	DS8355	DS8325
  Rudder servo	MPH81G	MP80G	DS8900G

  * Please use together with 2cell Li-po battery and a regulator which has enough output performance such as REG015.
   
• Triple axis gyro system (TAGS01 etc)
   
• Servo Horn (Big Horn 3pcs and Super Horn 1pc are included.)
  • 27mm to the mounting hole x 3pcs (for CCPM)
  • 14-17mm to the mounting hole x 1pc (for Rudder)
     
• Lead harness (150LG 2pcs are included.)
   
• 680mm-720mm long main rotor blade with 12/18mm thick blade grip, 5mm mounting hole
  * Do not use Wooden Main Rotor blades.
   
• Connectors
   
• Battery charger
  (Please select a charger compatible with your chosen batteries.)
   
• Battery Guide
  

  Cell	Voltage / Capacity	Size
  6S	22.2V 4500-5500mAh Lipo×2	Length 175mm (maximum)

• ESC Guide
  

  Li-po compatible
  12S	Li-po compatible

  * Please make sure the ESC has a slow start function. If you use an ESC without a slow start function, there is a possibility that when you start the motor, the sudden increase in RPM will damage the main rotor head or blades.
   
• Motor Guide
  

  Shaft diameter	6mm
  Motor attachment base dia (max)	61mm
  Motor diameter (max)	70mm
  Motor length (max)	67mm
  Mounting screw size	4mm
  Mounting screw hole pitch	30 - 32mm

  
  

  Pinion	Gear Ratio Pinion : Main	Motor KV value
  T9	10.3:1	KV520

Tools Required For Assembly

• Phillips Screwdriver (#0/#1/#2)
• Cross Wrench (4mm-7mm)
• Drills (4mm/6mm)
• Needle-nose pliers
• Scissors
• Hobby knife
• Soldering kit
• Sandpaper (#300-400)
• Epoxy Glue (more than 30 minutes to become hardened)
• JR Thrust bearing Grease (61597)
• JR Universal Precision Pitch Gauge (60326)
• Oil touch pen (61296)
• Other general tools for assembling the model

The following items will make assembly easier (not included)

• JR Universal Link Driver (61360)
• JR Universal Link Trimmer (60219)
• JR Universal Link Plier C (Straight Tip) (60242)
• Rotor blade balancer
• Hex driver
  • 1.5mm (61401)
  • 2mm (61402)
  • 2.5mm (61403)
  • 3mm (61404)
  • 4mm (61598)
• Nut driver
  • 4.5mm
  • 5mm
  • 5.5mm (61583)
  • 7mm (61584)