Items included

• Engine G260PUH･1 (with muffler)
• Carbon main rotor blades XB810
• Assembly Manual
• Hex Wrench (1.5mm/2mm/2.5mm/3mm)
• Thread Lock (Soft/Hard)

• 5-Channel or greater helicopter RC system with CCPM and 5 servos
  * When MPM system is used,It’s not required to have CCPM-compliant radio.
• Gyro system (G770T,G750T,G7000T etc.)
• Servo horn
  * Not necessary if supplied with your radio set.
  * Big Horn 3pcs and Super Horn 1psc are included.
  ･Radius of 27mm (for CCPM) 3pcs
  ･Radius of 10.5mm (for MPM) 3pcs
  ･Radius of 14-17mm (for Rudder) 1pc
  ･Radius of 12.5mm (for Throttle) 1pc
  * If you wish to use MPM system,please purchase following item.
  MPM conversion set [No.61211]
• Lead harness [No.04634] 2-3 pcs
  * Check your gyro for required quantity
• Fuel:Gasoline and Engine oil for two-cycle engine. [No.55100,Engine oil 1,000cc]
• Engine starting tool:
  Starting rod [No.60227],Starter and Power supply are needed when shaft starter is used.
  If you use Fuel pump,please use the one with gasoline resistant.

Tools Required For Assembly

• Phillips Screwdriver (Large/Small)
• Nut Drivers (4mm-12mm)
• Needle-nose pliers
• Drils (3mm/4mm/6mm)
• Metric rule (300mm or longer)
• Scissors
• Hobby knife
• Quick Drying Glue
• Epoxy Resin (30 minutes)
• JR Thrust bearing Grease [No.61005]
• Spray bottle
• JR Universal Precision Pitch Gauge [No.60326]
• Other general tools for assembling model helicopter

Useful Tools

• JR Universal Ball Link Driver [No.61360]
• JR Universal Ball Link Sizing Tool [No.60219]
• JR Universal Ball Link Pliers C (Straight Tip) [No.60242]
• Box drivers (4.5mm/5mm/5.5mm)
• Hex drivers (1.5mm/2mm/2.5mm/3mm/4mm)
• Reamer or Stepped reamer
• Rotor balancer