• Lithium-Polymer Battery (Li-Po)
  • 6 Cell (22.2V) 2,600mAh-5,000mAh
  • Size 46 x 60 x 160mm (maximum)
• Battery Connectors
• Battery Charger
• Transmitter (140 CCPM capable) and receiver
• Brushless motor : Shaft diameter 5mm / KV 1,600 to 1,800
• ESC : Lipo 6cell 75A or more
• Triple Axis Gyro System
• Mini Servo (Swash×3,Rudder×1)

Tools Required For Assembly

• Hexagon driver
  • 1.5mm (No.61401)
  • 2mm (No.61402)
  • 2.5mm (No.61403)
• Wrench:4.5mm
• Phillips screw drivers (#0、#1、#2)
• Rule: 15cm or longer
• CA Glue
• Epoxy glue (Hardening time; 30 Min. or More)
• Thrust bearing grease (No.61597)
• Sandpaper #300 to 400
• Universal Pitch Gauge (No.60326)
• Other general tools required for making a model

The following items will make assembly easier (not included)

• JR Universal Link Driver (61360)
• JR Universal Link Trimmer (60219)
• JR Universal Link Plier C (Straight Tip) (60242)
• Blade Balancer

http://www.youtube.com/watch?feature=player_embedded&v=reww8LK7qnU

Main Rotor Blades: Carbon 510mm
Tail Blades: Carbon 82mm
Motor: NHM-40-8P (1750KV)
ESC: NHA-75-SB5 (75A/BEC5A)
Gear ratio: 12.5:1:4.26

Propo: XG8 DMSS 2.4GHz Radio System
Gyro: Triple Axis Gyro System TAGS01
Swash Servo: FBL-DS11
Rudder Servo: DS3500G
RX: RG831B DMSS 2.4GHz Receiver