• A complete radio system capable of 120 degree or 140 degree CCPM
• Gyro System
• Main rotor blades
  Thick grips 12mm
  Bolt hole 4mm
  Length 600mm
  * wooden rotor blades are unusable
• Brushless Motor
  Approximately 740KV [8cell]
  Approximately 500KV [12 Cell]
• ESC 100A or greater
• Lithium-Polymer Battery
  4 Cell-4,400mAh (×2)
  6 Cell-3,300mAh (×2)
• Battery Connector Pins
• Battery Charger
• Lead harness
  Gold,60-core 150 LG (150mm)
  (Several may be required)

Tools Required For Assembly

• Phillips Screwdrivers (#0, #1, #2)
• Nut Driver
  • 4mm
  • 5mm
  • 5.5mm [No.61583]
  • 7mm [No.61584]
• Hexagon Driver
  • 1.5mm [No.61401]
  • 2mm [No.61402]
  • 2.5mm [No.61403]
  • 3mm [No.61404]
• Long-nose Pliers
• Scissors
• Hobby knife
• Rule:20cm or longer
• CA Glue
• Epoxy Glue (Hardening Time:30 Min. or More)
• Thrust Bearing Grease [No.61597]
• Silicon Grease [No.61377]
• Universal Pitch Gauge [No.60326]

Useful Tools

• JR Universal Link Driver [No.61360]
• JR Universal Link Plier C [No.60242]
• JR Universal Link Trimmer [No.60219]
• Reamer or Stepped Reamer
• Blade Balancer